1. Click the Windows 'Start' button and click the 'All Programs' option. Click 'Accessories' and click 'Remote Desktop' afterward. A connection dialog box will appear and open.2. Type in the name of the Remote Desktop computer and click 'Connect.' Input your Windows username and password in response to the Windows login screen. Click 'OK' after entering this information.3. Click the Windows 'Start' button and click the 'Computer' option in the remote computer. Locate the 'tsclient' drive and double-click this drive. Go to the location of the OCX file that you plan to install. Right-click...
Browse » Home » All posts
Friday, September 28, 2012
How to Remove Rundll
1. Click 'Start,' 'Run,' type 'command' (without the quotation marks) into the dialog box and press 'Enter.' The Windows Command Prompt will open.2. Type 'del rundll.exe' (without the quotation marks) into the Command Prompt and press 'Enter.'3. Close the Command Prompt and restart your comput...
How to Reinstall Winsock2
1. Click 'Start,' and enter 'cmd' into the search box at the bottom of the menu. When the 'cmd.exe' file appears in the search list, right-click the file and choose 'Run as administrator' from the menu. Then click 'Continue' in the window that comes up to get to a Windows command prompt.2. Enter 'netsh winsock reset' at the prompt, and press 'Enter.' A confirmation message appears in the window, followed by a new command prompt.3. Enter 'exit' by the prompt. Press 'Enter' to exit the window. The Winsock2 file resets itse...
Thursday, September 27, 2012
How to Repair a Corrupt DLL
1. Read the error message you computer gives you, when it fails to run the DLL. The message will likely say something like, 'This application failed to start because something.dll was not found or dll file is missing.' Even if the DLL exists, it'll give you such an error if it's corrupted. Write down exactly what it says.2. Visit a DLL download website (see Resources) and search the site for the DLL mentioned in the error message. Most DLLs are quite common and are easily found online.3. Download the DLL to the location of the old corrupted version on your hard drive. If your error message...
How to Reinstall a Copy of Hal.dll
1. Place your Windows installation disk into your CD tray and select 'Restart' from your system menu to reboot the computer. Your computer will restart and pause to display the available boot options.2. Press any key when you see the boot options message. The Windows setup files will load.3. Select the repair option to enter the recovery console. There you will see a choice of your operating systems. Choose your operating system. This will usually be your current Windows installation.4. Logon to the 'administrator' account and enter the appropriate password to bring up the command prompt....
Monday, September 24, 2012
How to Install Msvcr70.dll
1. Open your Web browser. Browse to a page where you can download a working version of msvcr70.dll for free. You can find a link to one of these pages in Resources, but there are several sites that offer these common .dll files for download.2. Click the download link and follow the on-screen prompts to save the file to your hard drive. Make sure you know the destination directory to which the file is being downloaded.3. Locate the downloaded file and check to see if it is a .dll file or a .zip file. If it is a .dll, skip the rest of this step. If it is a .zip, like the files you can download...
How to Disable WinHTTP Web Proxy Auto
1. Right-click on 'Computer' or 'My Computer,' and then select 'Manage.' This opens the Computer Management Console.2. Click on 'Services and Applications.'3. Click on 'Services' from the 'Services and Applications' tree. You now have three open windows inside the Computer Management Console.4. Locate 'WinHTTP Web Proxy Auto-Discovery Service' in the list in the center window. The list includes the services available on the local computer and is in alphabetical order.5. Right-click on 'WinHTTP Web Proxy Auto-Discovery Service,' and select 'Properties' from the pop-up menu. This opens...
Sunday, September 23, 2012
How to Fix an Error 1628
Clean Installation Disc1. Check the installation disc for any fingerprints, scratches or smudges. If the data is unable to be read from the disc, the 1628 error message may be generated.2. Use a microfiber cloth lightly dampened with water to gently clean the disc. Wipe from the inside of the disc directly outwards, never in a circular pattern.3. Attempt to reinstall the program after cleaning the disc. If the disc is clean and the error persists, there may be a problem with InstallShield.Repair InstallShield4. Disable running process of InstallShield. They may have crashed and need to...
Saturday, September 22, 2012
How to Install MSI Dll
1. Download MSI.dll from one of the several online dynamic link libraries. (see Resources). When you download the file, be sure to save it to the C:\Windows\System32 folder. Alternatively, you can save the file to the desktop and drag the file into the C:\Windows\System32 folder.2. Click 'Start,' 'All Programs,' 'Accessories' and 'Command Prompt.' The Command Prompt window opens.3. Type the following command into the Command Prompt. Press 'Enter' after the command.regsvr32 msi.dll4. Close the Command Prompt and restart your comput...
How to Access a Violation at the Address Module Ntdll Dll
1. Restart your computer in safe mode. Press and hold the 'F8' key as your computer restarts. This will take you to the 'Advanced Boot Options' menu. Use your arrow key to highlight 'Safe Mode.' Press the 'Enter' key.2. Restart your computer in normal mode and perform a clean boot. Click the Start menu and type 'msconfig.exe' in the search box. Press 'Enter' to launch 'System Configuration utility.' Click the 'General' tab and choose the option that says 'Selective startup.' Click to remove the check next to 'Load startup items.' Click the 'Services' tab. Click to place a check next to 'Hide...
Thursday, September 20, 2012
How to Delete a Winnt32 Dll
1. Click the 'Start' menu. Right-click on 'My Computer' and click 'Properties.'2. Click the 'System Restore' tab. Click the box to 'Turn off System Restore.' Click 'Apply' and 'OK.'3. Download 'SDFix.exe' (see Resources). Save the file on your computer and double-click the downloaded file to extract it into the 'C:\SDFix\' folder.4. Restart your computer and tap the 'F8' key while it is booting up to enter the boot options menu. Highlight 'Safe Mode' using the directional keys on your keyboard and press the 'Enter' key.5. Click the 'Start' menu and choose 'Run.' Type 'C:\SDFix\RunThis.bat'...
Tuesday, September 18, 2012
How to Convert Visual Basic 6
1. Open Visual Basic Express or run Visual Basic though Visual Studio .NET. Click on 'Open Project.' Locate the Visual Basic 6.0 project file, which should have a suffix of vbp. Select the project.2. The Visual Basic Upgrade Wizard will open, warning you that this is a Visual Basic 6.0 project needing an upgrade. Click 'Next' to continue. Select the default EXE type of project on the next screen and click on 'Next' to continue.3. Choose a location for the converted project by accepting the suggested one or clicking on 'Browse' to select a different folder location. Click 'Next' and allow...
Monday, September 17, 2012
How to Read DLL Files
Instructions1. Right-click on the DLL file located in the place you initially saved it.2. Click on 'Open With.'3. Select the 'Choose Default Program' option.4. Click on the icon of the software you wish to use to open the file---Microsoft Visual Studio, Microsoft Visual FoxPro 9.0 or Resource Hacker.5. Click on 'Browse' only if Windows does not display the application you wish to use. Search for it and then click on 'Open.'6. Click on 'OK.' Your DLL file will op...
Sunday, September 16, 2012
How to fix a Microsoft Word MSO.DLL Error
1. Download Mso.dll onto your desktop from one of the many online dynamic link libraries at ll-download.net and afreedll.com.2. Click 'Start' and 'Computer.'3. Double-click 'C: Drive,' 'Windows' and 'System32.' The System32 folder opens.4. Drag the Mso.dll file on your desktop into the System32 folder.5. Click 'Start,' type 'cmd' into the search field and press 'Enter' to open the Command Prompt.6. Type 'regsvr32 mso.dll' (without the quotation marks) into the Command Prompt and press 'Enter.'7. Close the Command Prompt and restart your comput...
Saturday, September 15, 2012
Windows XP Won#039;t Update
1. Click 'Start,' then 'All Programs.'2. Open the 'Accessories' folder, then select 'Notepad.'3. Copy and paste the following into Notepad.regsvr32 /s wups.dllregsvr32 /s wups2.dllregsvr32 /s wuweb.dllregsvr32 /s wucltui.dllregsvr32 /s wuaueng1.dllregsvr32 /s wuaueng.dllregsvr32 /s wuapi.dllregsvr32 /s vbscript.dllregsvr32 /s sccrun.dllregsvr32 /s dispex.dllregsvr32 /s msscript.ocx4. Click 'File,' then 'Save As.'5. Change the location to 'Desktop.'6. Change the 'Save as type' to 'All Files.'7. Type 'UpdateFix.Cmd' in the 'File Name' box.8. Click the 'Save' button.9. Double click...
Subscribe to:
Posts (Atom)