Tuesday, February 28, 2012

How to Fix Internal Error 2753


1. Click on the Windows Start button. In Windows XP, click on "Run," then type "cmd" and click the "Go" button. This will bring up the DOS command window. Vista and Windows 7 users click on Windows Start, then "All Programs" followed by "Accessories" and "Command Prompt."
2. Type "regsvr32 vbscript.dll" and press the "Enter" key.
3. You should now see the message "DllRegisterServer in vbscript.dll succeeded." If this message appears, the required files for the installer have been successfully registered and you should be able to install your programs.
4. Click on the installer file for your application and see if the error appears again. If the installation begins, the files are now properly registered. Repeat the process one more time if the installation still gives the "Error 2753" message.
Read more ►

How to Fix Appcrash Errors on a Computer


1. Delete any new programs that you have downloaded. Often, the cause of corruption in a computer system is a bad download that installs harmful files. If you started to get the Appcrash error on your system after downloading a new program or software from the Internet, it’s highly likely you have downloaded a bad product. Use the “Add/Remove Programs” feature in the Control Panel to get rid of the program immediately.
2. Uninstall the program that is crashing. It is possible to fix the program’s corrupted files while the program is still installed, but to make sure that you clear the program files completely, it is safest to completely uninstall it from the system.
3. Run a full scan of your computer. Your computer should already have antivirus software installed that can scan for corrupted files and either fix them or delete them from your system. If you do not have antivirus software on your computer, that could be a big part of the problem. Purchase and install antivirus software as soon as possible. Once you have the antivirus program installed, open it and click “Scan Computer.” The antivirus scan will isolate bad files and you will be given the option to remove them from your system.
4. Reinstall the program that was crashing. Now that the corrupted files have all been removed, your program should run smoothly after reinstallation.
5. Check for program incompatibility. If, after a thorough scan and cleaning of your computer and reinstallation of your program, the Appcrash errors continue, the program you are trying to use may not be compatible with your operating system or other programs on your computer.
Read more ►

How to Find Wlanapi.dll


1. Go to a free DLL website (see links in the References section) and click 'Download wlanapi.dll.' Click 'Save' in the confirmation pop-up to begin downloading file.
2. Right-click the saved DLL file and select 'Copy.' Go to the 'Start' menu, click 'Computer' or 'My Computer,' double-click the 'C:' drive, double-click the 'Windows' folder, double-click the 'System32' folder, right-click anywhere in a blank space and select 'Paste.' Click 'Yes' to overwrite any existing files with the same name (if any).
3. Go to the 'Start' menu, type 'run' in the 'Start Search' box and hit 'Enter.' Type 'Regsvr32 'C:\Windows\System32\wlanapi.dll' in the search box and hit 'Enter' to register the DLL.
4. Restart your computer.
Read more ►

Sunday, February 26, 2012

How to Delete Mswinsck.OCX


1. Click the 'Start' menu in the bottom-left corner of your computer screen. Select 'Search' from the pop-up list. The Windows search window will appear. Click 'All Files and Folders' on the left side of the window.
2. Type 'mswinsck.ocx' in the 'All or part of the file name' search box. Make sure that you have selected 'Local Hard Drives C:' as the search criteria. Click the 'Search' button to commence searching for the file.
3. Browse through the search results to find the mswinsck.ocx file. Right-click it. Choose 'Delete' from the drop-down menu. Press the 'Yes' button to confirm its deletion.
Read more ►

Saturday, February 25, 2012

How to Fix Error 633


1. Shut down all currently running applications and restart your computer. Press 'F8' repeatedly before Windows begins to open the Windows Advanced Options Menu.
2. Scroll down and select 'Safe Mode.' Press 'Enter' to log into Windows Safe Mode. Safe Mode is used for troubleshooting and repairing system components.
3. Click the Windows 'Start' button and select the 'Control Panel.' Double-click 'Add or Remove Programs' to open the programs window. Click 'Program and Features' (Windows Vista users) and select 'Uninstall a Program' to open the programs window.
4. Click the incompatible software (e.g., Palm Desktop and Synchronization Software) and select 'Change/Remove.' Click 'Yes' to confirm and uninstall the program from your computer.
5. Restart your computer normally to complete the process.
Read more ►

Friday, February 24, 2012

How to Restore Uxtheme.Dll XP


1. Download the uxtheme.dll file.
2. Right-click the saved DLL file and click 'Copy.' Go to the 'Start' menu, click 'My Computer,' double-click the 'C:' drive, double-click the 'Windows' folder and then the 'System32' folder. Right-click anywhere in a blank space and click 'Paste.'
3. Go to the 'Start' menu and click 'Run.' Type Regsvr32 'C:\Windows\System32\uxtheme.dll' in the search field and hit 'Enter' to register the DLL. Click 'Yes' in the pop-up to confirm the registration.
4. Restart your computer.
Read more ►

Thursday, February 23, 2012

How to Remove Trojan.FakeAlert


How to Remove Trojan.FakeAlert
1. Search the computer for the Trojan.FakeAlert files by clicking Start > Search > All Files Or Folders. Search for the following files and delete each one.
bridge.dll
jao.dll
pynix.dll
questmod.dll
rpnqrdnm.exe
runsrv32.dll
runsrv32.exe
susp.exe
tcpservice2.exe
udpmod.dll
users32.exe
winflash.dll
wstart.dll
zserv.dll
2. Remove the viral processes using Windows Task Manager by pressing CTRL + ALT + DEL on the keyboard. Look for the Trojan.FakeAlert processes under Image Name. Highlight the following viral processes and click End Process.
rpnqrdnm.exe
runsrv32.exe
tcpservice2.exe
susp.exe
users32.exe
3. Edit the Registry by clicking Start > Run > (type) regedit and click the OK button. Search the registry keys by clicking Edit > Find > search for the registry key listed below and right click on the registry key and click Modify > Delete.
HKEY_CLASSES_ROOT\clsid\{60e2e76b-60e2e76b-60e2e76b-60e2e76b-60e2e76b}
4. Delete the virus dll files by clicking Start > Run > (type) cmd and click the OK button. Type in the Dir:/folder name from step 1. Example---C:\Windows or C:\Winnt
Find and delete the following dlls by typing del filename. Example---del zserv.dll
zserv.dll
wstart.dll
winflash.dll
udpmod.dll
runsrv32.dll
questmod.dll
pynix.dll
jao.dll
bridge.dll
Read more ►

How to Fix a Windows Vista Sidebar


1. Click the 'Start' menu (Windows logo) on the toolbar to open it, and click the 'All Programs' folder.
2. Open the 'Accessories' file and click the 'Command Prompt.' Click 'Run as administrator.'
3. Type the code 'regsvr32.exe' followed by a single space and the words 'ALT.DLL.'
4. Press the 'Enter' key on your keyboard and try to use your sidebar.
5. Enter the code 'regsvr32 jscript.dll' into the prompt box if your sidebar is still not working. Press the 'Enter' key after typing in the code.
6. Type in 'regsvr32 msxml3.dll' and press the 'Enter' key again.
Read more ►

Wednesday, February 22, 2012

How to Find Msgina.dll


1. Press the Windows key on the keyboard or click the 'Start' button in the lower left corner of the screen.
2. Open 'My Computer' if you are using Windows XP. Open 'Computer' if you are using Vista and Windows 7.
3. Double click the drive letter of your hard disk, which is usually 'C.'
4. Double click the 'Windows' folder and open 'System32.'
5. Click 'Name' to arrange the files and folders in alphabetical order.
6. Scroll down the list of files and folders until you find 'msgina.dll.'
Read more ►

Tuesday, February 21, 2012

How to Build ActiveX Controls


Visual Basic 6.0
1. Start Visual Basic. Click on 'File' and then 'New Project.' Select 'ActiveX Control' from the list of projects and click 'OK.' Click on the 'Name' property for the control and enter a new name, for example 'TestControl.'
2. Double-click on objects in the toolbox to add them to the control. Click and drag these controls on the form to arrange their appearance.
3. Double-click on one of the controls on the form to open up the code window. Type the code that will determine how the control responds to user events.
4. Press 'F5' to test the control. Press' OK' to start the control in an web browser. Test the objects when the control loads. Stop running the program and fix any errors.
5. Click on 'File' and select 'Make TestControl.ocx' to create the ActiveX control.
Visual C++ 6.0
6. Start Visual C++. Click on 'File' and then 'New.' Select 'MFC ActiveX ControlWizard' from the list.
7. Type a name in the project name text box, for example 'TestControl.' Click 'OK' to open the project wizard. Click 'Finish' to create the project files.
8. Right-click on '_DTestControlEvents' and select 'Add Event.' Click on the external name drop-down list and select an event. Click on the 'Custom' radio button and enter parameters in the list if you need them. Click 'OK' to create this event.
9. Click on '_DTestControl' and select 'Add Method.' Select external and internal names and a return type. Add parameters to the parameter list if needed and click 'OK.' Enter the class header file and define the method.
10. Open the 'TestControlCtl.cpp' file's code window. Define your method by coding it.
11. Create other events and methods similarly. Open the declaration file and declare your message and error handlers like you would in any other C++ project. Open the cpp file and define these handlers.
12. Press the 'Run' button or 'CTRL+F5' to test the control. In the executable file name box, click on the arrow and select 'ActiveX Control Test Container' and click 'OK.'
13. Click on 'Edit,' then 'Insert New Control.' Locate your ActiveX Control in the list, click on it and then click 'OK.' Click on 'Control' and then 'Invoke Methods' to test the methods you created. Close the test window and fix any errors.
14. Save the project files. Click on 'Build' and then 'Build TestControl.ocx' or press 'F7' to create the ActiveX control.
Read more ►

How to Fix Ntdll.dll Errors


1. Restart your system and press 'F8' in succession, until the advanced Windows option appears. Load the 'Last Know Good Configuration' option. Check to see if the ntdll.dll error messages are gone.
2. Remove the software that you put on your PC prior to the onset of ntdll.dll error messages. It is possible that the software program is the cause of the errors. Once you remove the software, test to see that the errors no longer appear.
3. Click 'Start' and open 'All Programs.' Open the Windows Update feature. Check for the latest updates and install them. Reboot your system once the update is complete.
4. Run Internet Explorer (No Add-ons). Some add-ons can cause DLL files, such as the ntdll.dll, to malfunction. Click 'Start' and open 'All Programs.' Select 'Accessories' and open 'System Tools.' Open 'Internet Explorer (No Add-ons).'
Read more ►

Monday, February 20, 2012

How to Turn Off the Status Bar in IE 7


1. Open Internet Explorer.
2. Click 'View' in the top menu. If you cannot see 'View,' press 'Alt' to display the menu bar.
3. Move your mouse pointer over 'Toolbars' and uncheck 'Status Bar' to hide the status bar.
Read more ►

Sunday, February 19, 2012

How to Find CLSID ActiveX in IE


1. Open the registry editor by clicking 'Start' and 'Run,' typing 'regedit' into the run dialog and pressing 'Enter.'
2. Expand the 'HKEY_CLASSES_ROOT' folder by clicking the plus sign to its left.
3. Select the 'CLSID' folder under the 'HKEY_CLASSES_ROOT' folder by clicking it.
4. Click 'Edit' and 'Find.'
5. Type 'Control' in the 'Find What' box.
6. Check the 'Keys' box under 'Look At' and uncheck the 'Values' and 'Data' boxes.
7. Click 'Find Next.' The first ActiveX control will be displayed.
8. Click 'ProgID' under the 'Control' folder. If the name displayed in the 'ProgID' folder isn't the ActiveX control you want, press 'F3' to find the next control.
9. Repeat this process until the name of the ActiveX control is shown in the 'ProgID' folder.
10. Read the name of the folder containing the 'ProgID' sub-folder from the left pane of the registry editor window. The folder's name is the ActiveX control's CLSID.
Read more ►

How to Fix Application Errors


1. Close all currently running computer applications by clicking the red 'X' in the upper right-hand corner of the program's window.
2.
Press the 'Start Menu' button and click on the 'Control Panel' option. This will open a new window.
3.
Click on the text field in the upper right-hand corner of the 'Control Panel.' Type 'solution'--this will bring up one or more clickable options; click on the option labeled 'Problem Reports and Solutions.' This will open another new window.
4.
Click on 'See Problems to Check,' located on the upper left-hand side of the 'Problem Reports and Solutions' window.
5.
Scroll the list of recent computer problems to find problems associated with the specific application you're trying to fix. You can view more details about the recent errors for that application by clicking on 'View Details.' Check the boxes for any application errors that you want Windows to automatically fix. If you want to fix all recent program errors, simply click 'Select All' near the top left-hand side of the screen.
6.
Click 'Check for Solutions.' Windows will initiate an automatic search for fixes to the specific application problems you have selected---you must have an active Internet connection for this search to work. Be patient while the search is conducted; depending on the number of errors Windows needs to fix, it may take several minutes to complete. Once Windows has identified solutions to your computer's specific problems, click to install the new fixes for your PC's applications.
Read more ►

How to Uninstall Active X in Windows XP


1. Select the Windows 'Start' button, choose 'Settings' and then select 'Control Panel.'
2. Double-click on 'Add/Remove Programs' and then select the 'Install/Uninstall' tab.
3. Choose the ActiveX control you would like to delete from the list of programs, select 'Add/Remove' button and then follow the prompts to uninstall the ActiveX.
4. Open Windows Explorer if the ActiveX control you are trying to delete is not displayed on the list of installed programs and then go the 'Windows\Downloaded Program Files' folder, or the 'Winnt\Downloaded Program Files' folder.
5. Remove/Uninstall the ActiveX control by right-clicking on it, selecting 'Remove' and then choosing 'Yes' when prompted if you would like to remove the ActiveX Control.
Read more ►

Friday, February 17, 2012

How to Use MSFlexGrid in VB6


1. Click the Windows "Start" button and select "All Programs." Click "Microsoft Visual Basic," and then click "Visual Basic 6" to open the compiler.
2. Open the desktop form that contains the MSFlexGrid. If you do not already have an MSFlexGrid control on the form, drag and drop a control from the toolbox.
3. Set the number of rows to the amount of records in your data set. The following code sets up the number of rows equal to the amount of records in the "customers" record set:grid.Rows = customers.RecordCount
grid.Cols = 2
4. Add data to the MSFlexGrid control. For instance, the following code adds the customers record set's first and last name to the two MSFlexGrid's columns:MSFlexGrid.Col[0].Text = customers(0)
MSFlexGrid.Col[1].Text = customers(1)
5. Add the code to loop to the next record. The following code moves the record set to the next record, so you can loop through each row to add to the MSFlexGrid:customers.MoveNext
Read more ►

How to Delete Updspapi.dll


1. Click the 'Windows Start Menu' icon.
2. Type 'cmd' into the 'Search Programs and Files' box and press 'Enter' if you are using Windows Vista or Windows Seven. Click 'Run' and type 'cmd' into the Run box and click 'OK' if you are using Windows XP. The Windows Command Prompt will open.
3. Type 'regsvr32 /u updspapi.dll' (without the quotation marks) into the Windows Command Prompt and press 'Enter.'
4. Close the Windows Command Prompt and restart your computer.
Read more ►

How to Fix a Logonui.exe Application Error


1. Put your Windows CD/DVD into your DVD drive.
2. Click your 'Start' menu, click 'All Programs,' click 'Accessories' and click 'Run.'
3. Type 'expand D:\i386\logonui.ex_ %windir%\system32\logonui.exe' without the quote marks. Replace 'D' with your CD/DVD drive. This replaces the corrupt LogonUI application with a fresh one from your operating system's installation resource.
4. Restart your computer and remove the disc from your drive.
Read more ►

How to Register Msdatgrd OCX


1. Click on 'Start' and choose 'Run' if you are using Windows XP. Click the Windows logo to open the Start menu in Windows Vista or 7. Type 'cmd' in the text field and press 'Enter' to open a Command Prompt.
2. Enter 'regsvr32 MSDATGRD.OCX' at the Command Prompt. Press 'Enter' to register the OCX file. A confirmation message will appear if the registration was successful.
3. Reboot your computer to ensure the changes take effect.
Read more ►

How to Fix an SP DLL


1. Type 'Startup' into the search bar on your Start Menu and click the top program that appears in the list. Enter your administrative password, if necessary. Scroll through the list of programs that start when you log in and delete 'sp.dll' if it is present.
2. Press the 'Windows + R' keys to open the Run dialog and then type the command 'msconfig' into the text-entry field. Click on the 'Startup' tab and check to see if 'sp regedit -s C:\windows\sp.dll' is in the list. Uncheck its box, if it is.
3. Open Run again and enter the command 'regedit'. This will open the Windows Registry Editor. Press the 'Control + F' keys and do a search for 'sp.dll'. Delete any keys that show up as search results, but be careful not to damage any other part of the Registry.
4. Open the Windows Search program and search your entire hard drive for 'sp.dll'. Open its containing folder, select the DLL and press the 'Shift + Delete' keys to destroy it forever.
5. Open Internet Explorer and press the 'Alt' key to bring up the menu bar. Click on 'Tools' and then 'Internet Options' and switch to the 'General' tab. Delete the current homepage address, type in the address of your choice and click 'OK.'
Read more ►

Thursday, February 16, 2012

How to Get Into Recovery Mode Without Logging Into XP


1. Turn on your computer, insert your Windows installation CD in the CD tray and reboot the computer. When the computer gets to the start-up screen that displays your BIOS information, press “ESC” on your keyboard. This will take you to the “Boot Menu” screen.
2. Choose the “CD-ROM Drive” selection. Press “Enter.” This will give you a command line screen that will prompt you to “Press any key to boot from CD…” Quickly press any key on your keyboard. After you press any key, you will see a blue screen with \"Windows Setup\" in the top left corner.
3. Allow the set-up CD to load the system drivers as if you are performing an installation of Windows XP. When the system drivers are loaded, this will bring you to a screen that says “Welcome to Setup.” You will see three options.
4. Go to the Recovery Console by following the directions under option two that reads, “To repair a Windows XP installation using Recovery Console press R.” As directed, press “R” on your keyboard. This will take you to the next screen and into the Recovery Console.
5. Once inside the Recovery Console, select the Windows installation that you would like to log onto and press “Enter.” The Recovery Console will prompt you to enter the Administrator password. If there is a password, enter the password and press “Enter.” Usually by default there is no password; if this is the case, just press “Enter” and you will automatically log into the Windows installation you selected previously.
6. At the command prompt (which looks like this: C:\\Windows>), you can make limited changes to the operating system.
Read more ►

Tuesday, February 14, 2012

How to Repair Setup.exe


Troubleshooting Install/Uninstall
1. Terminate the program installation and delete the downloaded program. Download the program again and attempt to reinstall to replace missing files that may have been skipped during a previous installation.
2. Close the web browser to work offline if reinstallation is unsuccessful. Disable any antivirus software and firewall programs that may be halting the installation process, and repeat the installation or use the 'repair' feature if it is available. Enable AV software and firewalls before accessing the Internet.
3. Open the 'Event Viewer' to inspect the Windows log for errors that may have occurred during recent installs or uninstalls, or reports of missing .dll files. For Windows XP, the Event Viewer is available by clicking 'Start' > 'Control Panel' > 'Performance and Maintenance' > 'Administrative Tools' and double-clicking 'Computer Management' > 'Event Viewer.' Other Windows versions use similar pathways.
Finding and Replacing a Missing DLL File
4. Open 'Search' from the Windows 'Start' menu and type in the filename of the missing .dll file. Include hidden and system files in the search to locate the file in another program folder.
5. Repeat the search, if unsuccessful, on another computer using the same operating system or Windows version. A version mismatch of the .dll can corrupt the file on one computer, but an intact version can be retrieved from a computer with the same operating system.
6. Search online .dll databases for an unmodified version of the missing .dll. Download the file that corresponds to the Windows OS of the computer with the missing file.
7. Open the program folder of the program with the missing file, and copy the .dll file to the folder. Alternately, open the 'Windows' folder and insert the .dll file in the 'system32' folder. Reboot the computer.
8. Download and install a Registry Cleaner program if reinstallation or replacement of missing .dll files is unsuccessful. Create a system backup when prompted, and run a full system registry scan following all on-screen prompts.
Read more ►

How to Add DLL Files


1. Reinstall software that prompts messages of missing .dll files. Many pieces of software install .dll files on your computer as you install the software itself, and it could be that one of these files has been accidentally deleted or corrupted. Reinstalling the software can add or replace these files and often resolves .dll problems that only occur when using a specific software title. If this doesn't add the .dll files you need, proceed to the next step.
2. Visit a Web site that contains thousands of .dll files available for free download. A link to one such site can be found in the Resources section below.
3. Search the site for the .dll files you need. Make sure you read the file details in your search results to confirm that you've found the files you need.
4. Download the .dll files you need.
5. Move the .dll files to the system folder. The location of this folder varies by the version of Windows you are using. In Windows 95, 98 and ME, the folder path is 'C:\Windows\System.' In Windows 2000 and NT, it's 'C:\WINNT\System32.' The path for all 32-bit versions of Windows XP and Vista is 'C:\Windows\System32' and the path for 64-bit versions of these operating systems is 'C:\WindowsSysWOW64.'
6. Reboot your computer.
Read more ►

Cannot Locate Browseui.Dll


1. Restart the computer. Press 'F8' on your keyboard when the BIOS information is displayed. Choose the 'Safe Mode with Command Prompt' option.
2. Insert the Windows XP CD-ROM. Type 'cd\windows\system32' at Command Prompt. Now type 'ren browseui.dll browseui.old' and press 'Enter.'
3. Change to your CD-ROM directory by typing the CD drive letter followed by a colon, and press 'Enter.' The CD-ROM drive letter is usually E, D, or F. Type 'cd i386' and press 'Enter.' Type 'expand Browseui.dl_ %Windir%\System32\Browseui.dll,' and then press 'Enter.' Make sure you type it exactly as it is here.
4. Press 'CTRL' + 'ALT' + 'DEL' on your keyboard, and restart the computer.
5. Load Windows Explorer and Internet Explorer to make sure the problem has been fixed. If you see an error message stating that 'Explorer has encountered a problem and needs to close,' you need to unregister and then reregister the browseui.dll file. To do this, Click 'Start,' click 'Run' and then type 'cmd' and click OK.
6. Type 'cd\windows\system32' at the command prompt and press 'Enter.' Type 'regsvr32 browseui.dll /u,' and press 'Enter.' Type 'regsvr32 browseui.dll,' and press 'Enter.' Type 'exit' and press 'Enter' to close the Command Prompt window. Restart the computer.
Read more ►

Monday, February 13, 2012

How to Fix a Windows Root System Problem


1. Boot the system using the last known good configuration option. Press the F8 key when the computer starts to access the Boot Option Menu. Tab down to Use Last Known Configuration and press enter to continue loading Windows.
2. Restore to a previous point when the system was working using System Restore. If Windows is not loading properly start the system in Safe Mode. Press the F8 key to go to the Boot Menu Options and select Safe Mode from the list.
3. Click the 'Start' button and then select 'All Programs.' System Restore is found in the System Tools program group which is located in the Accessories program group. Click on 'System Restore' and select a restore point that you want to use. You may be prompted to restart the system after the process has completed.
4. Uninstall the last program that was added to the system. If the system problem occurred after a new program was installed a conflict could have been created. This happens when the new program attempts to share a file that is needed by Windows. Removing the offending program may correct the root system problem.
5. Click the 'Start' button and then select 'Control Panel.' Click the Add and Remove Programs icon to see a list of installed programs. Scroll down to find the last program that was installed. Click the 'Remove' button to start the uninstall process. Restart the computer and let it load normally to see if the problem has been corrected.
6. Restore a backup of the Registry. If a program such as RegSeeker was used to clean the registry, a backup can be created each time it is run. Double click the icon on the desktop to start the program. Click on the Backups option on the left to see a list of registry backup files. Double click on a backup file and then click the Restore button to begin the process. You will need to restart the system when the backup has been restored.
Read more ►

Sunday, February 12, 2012

How to Remove Windows PC Defender Virus


1. Turn on or restart the computer and press "F8" on the boot screen to open the Windows Advanced Boot Options menu. Scroll to "Safe Mode" and press Enter.
2. Sign in to Windows. Hold down "Ctrl-Shift-Esc" to open Windows Task Manager. Click the "Processes" tab.
3. Click "Image Name" to alphabetize the processes. Right-click "eb.exe." Select "End Process" from the menu. Click "End Process" again.
4. Repeat the above step for fix.exe, ppal.exe and WP345d.exe.
5. Click "File." Click "New Task" to open the "Run" window. Type "cmd" and press "Enter" to open a command-line window.
6. Type "cd c:\windows\system32" at the command-line prompt. Press "Enter." Type "regsvr32 -u mozcrt19.dll" and press "Enter" to unregister the Windows PC Defender dynamic linking library.
7. Repeat the process for sqlite3.dll, cid.dll and ddv.dll. Type "cd %userprofile%\recent" at the command prompt and press Enter. Unregister tempdoc.dll. Close the command-prompt window.
8. Reopen the "Run" box. Type in "regedit" or "regedit.exe." Press Enter to open Windows Registry Editor.
9. Navigate through the "HKEY_CLASSES_ROOT" and "CLSID" paths. Right-click "{3F2BBC05-40DF-11D2-9455-00104BC936FF}." Click "Delete." Click "Yes" to confirm.
10. Return to "HKEY_CLASSES_ROOT." Right-click "WP345d.DocHostUIHandler" and click "Delete." Click "Yes" to confirm the deletion.
11. Go through "HKEY_USERS | .DEFAULT | Software| Microsoft| Internet Explorer." Click "SearchScopes."
12. Right-click "URL," which has the value of "http://search-gala.com/?&uid=201&q={searchTerms," and click "Delete." Click "Yes" to confirm the deletion.
13. Return to "Internet Explorer." Right-click "PRS," which has the value of "http://127.0.0.1:27777/?inj=%ORIGINAL%." Click "Delete." Click "Yes."
14. Go to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings." Find and delete "UID" with the "201" value.
15. Click "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\Post Platform." Delete "89770891803."
16. Open "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run." Delete "Windows PC Defender."
17. Click the Start button at the bottom left of your monitor screen. Click "Computer." Enter "8424.mof" into the search bar and wait for the computer to locate the file. When the file appears in the results, right-click it, then click "Delete." Click "Yes."
18. Repeat the process for the following files associated with Windows PC Defender: exec.tmp, mozcrt19.dll, CLSV.tmp, fix.exe, search.xml, ddv.dll, eb.exe, sqlite3.dll, tempdoc.dll, WP345d.exe, runddlkey.drv, WPCD.ico, ppal.exe, wpcd.cfg, energy.sys, vd952342.bd, cookies.sqlite, Windows PC Defender.lnk, PE.drv, cid.dll, eb.sys, FS.drv, Instructions.ini, kernel32.drv and PE.tmp.
19. Go to "C:\Documents and Settings\All Users\Application Data." Delete the following folders: "3adffe," "WPCDSys" and "345d567."
20. Type "%userprofile%\application data" into the address bar and press Enter. Right-click "Windows PC Defender" then click "Delete." Click "Yes" to completely remove the Windows PC Defender virus from your computer. Restart your computer.
Read more ►

How to Reinstall the Remote Access Connection Manager Service


1. Insert your Windows installation disk into your computer's CD or DVD-ROM.
2. Click 'Perform Additional Tasks' on the pop-up window.
3. Click 'Install Remote Desktop Connection.'
4. Pass through the installation prompts, then restart your computer to finalize the process.
Read more ►

How to Record Comcast on Demand


1. Contact Comcast and order DVR. You can add DVR to your current plan or package. Rates vary on your plan or package. Once you order DVR, you can start using it right away.
2. Press 'MY DVR' on your remote. The DVR menu will appear. You can view recordings, play them, create manual records or record from your listings.
3. Press the '1' button to access Comcast On Demand. Navigate through the menu to select the movies or shows you want. Press the 'Play' button to play the show or movie.
4. Press the red button in the center of the remote to begin recording. This instantly records the program from the beginning to the ending.
5. Press the 'MY DVR' button. Navigate down to 'Watch Programs.' The list of recorded programs will appear in this submenu. Use the navigational buttons to choose your recorded program and to watch it.
Read more ►

Saturday, February 11, 2012

How to Remove AMIP for iTunes Error


1. Close iTunes, then click “Start” and select “Computer.”
2. Type “Program Files\iTunes\Plug-ins” (without the quotes) in the Search box and press “Enter.”
3. Click to select “ituneswrapper.dll” and press “Delete.”
Read more ►

Friday, February 10, 2012

How do I Install ActiveX on Windows XP?


1. Click "Tools," then click "Internet Options." Click the "Security" tab, then set the "Internet" control level to "Custom Level."
2. Scroll down the "Security Settings" list that pops up to locate "ActiveX Controls and Plug-ins." Click "Enable" under "ActiveX Controls and Plug-ins." Click "OK," then "Yes" to confirm your choice. Click "Apply," and then "OK." This fully enables ActiveX once it has been installed.
3. Click "OK" to close the window and resume normal computer use.
Read more ►

Thursday, February 9, 2012

How to Install a Cryptographic Service


1. Click the 'Start' button, and then click 'Run.' Type 'cmd' in the dialog box, and then press 'Enter' to open the command prompt.
2. Type 'net stop cryptsvc' in the command prompt window, and then press 'Enter' to stop the Cryptographic Service in case it is already running.
3. Type 'regsvr32 softpub.dll' and then press 'Enter.' Windows displays a message confirming that it registered the Dynamic Link Library (DLL) file successfully. Click 'OK.'
4. Type 'regsvr32 wintrust.dll' and then press 'Enter.' Click 'OK.'
5. Type 'regsvr32 initpki.dll' and then press 'Enter.' Click 'OK.'
6. Type 'regsvr32 dssenh.dll' and then press 'Enter.' Click 'OK.'
7. Type 'regsvr32 rsaenh.dll' and then press 'Enter.' Click 'OK.'
8. Type 'regsvr32 gpkcsp.dll' and then press 'Enter.' Click 'OK.'
9. Type 'regsvr32 sccbase.dll' and then press 'Enter.' Click 'OK.'
10. Type 'regsvr32 slbcsp.dll' and then press 'Enter.' Click 'OK.'
11. Type 'regsvr32 mssip32.dll' and then press 'Enter.' Click 'OK.'
12. Type 'regsvr32 cryptdlg.dll' and then press 'Enter.' Click 'OK.'
13. Type 'net start cryptsvc' and then press 'Enter' to restart the Cryptographic Service. Close the command prompt.
Read more ►

Tuesday, February 7, 2012

How to Fix the Rundll32.exe Problem


1. Restart your computer and press the 'F8' key before Windows loads to access Safe Mode. After pressing 'F8,' the Windows Boot Menu with Advanced Options screen will appear.
2. Press the 'Down' key on your keyboard to navigate to the 'Safe Mode' option and then press 'Enter.' After Windows loads in Safe Mode, you will have access to the desktop.
3. Click 'Start' and then click on 'My Computer.' Double-click the 'C:' drive and then double-click the Windows folder. Double-click the 'INF' folder and right-click the 'Sr.inf' file.
4. Click the 'Install' option and let Windows reinstall the file. Restart the computer.
Read more ►

Saturday, February 4, 2012

How to Fix MSI.Dll


1. Click the 'Start' button. Click 'My Computer' if you are running Windows XP. Type 'start explorer' in the Search field if you are running Vista or Windows 7. Click 'Enter.'
2. Open the following folder path:C (or the drive letter corresponding to your hard drive) > Windows > System32
3. Download the msi.dll to your desktop (see Resource). Drag the file to the open System32 folder. Confirm the replacement of the corrupt msi.dll file.
4. Press 'R' + the Windows key.
5. Type the following in the dialog box:regsvr32 msi.dll
6. Click 'OK' to register the file.
Read more ►

How to Remove a PMC Taskbar


1. Right click an empty space on the Windows Taskbar and choose 'Task Manager.'
2. Select the 'Processes' tab. Right click the 'pmc.taskbar.palette.dll' process and choose 'End Process' from the drop-down menu.
3. Launch Windows Explorer and navigate to the directory where the 'pmc.taskbar.dll' file is located. This is generally located under the 'C:\Program Files\Pinnacle\MediaCenter,' or 'C:\WINDOWS\System32' directories.
4. Right click 'pmc.taskbar.dll,' and choose 'Delete' from the drop-down menu.
5. Launch a free Dll-repair program, such as 'Free Dll Repair Tool,' or 'Pmc.Taskbar.Palette.dll Repair.' Download one, if necessary (see Resources).
6. Install and launch the Dll repair tool, click the 'Scan' button. The 'pmc.taskbar.dll' will display as a result. Click the 'Repair' button and allow for the process to complete. PMC Taskbar will be automatically removed.
Read more ►

How to Fix a Shell32.Dll Not a Valid Windows Image


1. Reboot the computer. While Windows is trying to boot, continuously press the 'F8' key. A screen of various mode options. Choose to boot Windows in 'Last Good Config' or 'Safe Mode.' 'Last Good Config' is the better choice, but Windows may not be able to boot in that mode. You will need one of these modes to access your CD-ROM.
2. Put in your Windows CD in the CD-ROM after Windows have loaded in one of the above modes.
3. Reinstall and repair Windows using the Windows Installation disk. The setup screen will appear automatically after you put the CD in. Click on 'Reinstall Windows' on the setup screen. Follow the installation wizard to repair Windows to a state that can load without errors.
4. Restart Windows after the installation. The mode screen may appear again. This time choose 'Start Windows Normally' to start Windows as you would before the errors started. You shouldn't have any other problems loading Windows now.
Read more ►

Friday, February 3, 2012

How to Find Wininet.dll in Vista


1. Log in to the Windows Vista computer with the username and password of an Administrator account. Click the 'Start' button on the Windows Vista taskbar and click 'Computer' in the menu that appears.
2. Double-click the 'C:' drive icon in the 'Computer' window, then double-click the 'Windows' directory.
3. Double-click the 'System32' directory. Verify that the 'wininet.dll' file is listed in the 'System32' window. If not, proceed to the next step.
4. Click the 'Tools' menu near the top of the 'System32' window and click 'Folder Options' in the menu that appears. Click the 'View' tab.
5. Click the 'Show hidden files and folders' radio button. Click to clear the 'Hide extensions of known file types' check box and click 'OK.'
6. Verify that the 'wininet.dll' file is now visible in the 'Internet Explorer' directory.
Read more ►

How to Register a VB6 OCX


1. Open Visual Basic 6.0 from a desktop shortcut or your Start menu. Choose 'File,' then 'New Project.' Set the type as 'Standard EXE.'
2. Add a new module to the project. Name the module 'Module1' or any other basic title you prefer.
3. Copy the example code provided by Microsoft (see References) into the 'General Declarations' section of the module you created. Replace all instances of 'ComCtl32' in the code with the name of the Visual Basic 6.0 OCX file that you want to register.
4. Press 'Control' and 'G'at the same time to view the immediate window. Type in 'RegisterYourOCX' where 'YourOCX' is the name of the OCX file you are registering ('ComCtl32' in the example). Press 'Enter' to register the OCX file.
Read more ►

How to Fix a WAB DLL


1. Click 'Start,' select 'Search' then click 'All Files and Folders.'
2. Type 'Wab32.dll' and press 'Enter' on your keyboard.
3. Right click the file (if it shows up on the search menu) and select 'Rename.' If you cannot find the file, that means it was erased at some point, and you can proceed to Step 5.
4. Type 'Wab32.old' to replace the original name and press 'Enter.' Close the search window. Your address book information will remain intact after you rename the file, because the WAB.DLL itself does not store the information. Rather, it allows the computer to access the information in another location.
5. Click 'Start,' select 'Settings' then click 'Control Panel.'
6. Select 'Add/Remove Programs.'
7. Select the 'Windows Setup' tab at the top of the menu. Click 'Components,' then uncheck the box next to 'Microsoft Outlook Express.' Click 'Apply' and wait for the program to uninstall.
8. Re-check the box next to 'Microsoft Outlook Express.' Click 'Apply' to reinstall the program.
9. Restart your computer.
Read more ►

How to Fix Windows XP With Missing or Corrupt System Files


1. Start your computer up and log into your Windows XP operating system with an administrator-level user account.
2. Insert your Windows XP CD into your CD drive and close any popup windows that may appear.
3. Click on the 'Start' button, open the 'Run' utility, type 'cmd' and then press the 'Enter' key.
4. Type 'sfc /scannow' into the command prompt and wait while the scanning utility checks your system files for damage or deletion. If any bad files are found, they are automatically replaced.
Read more ►

Thursday, February 2, 2012

How to Disable the Microsoft License Manager


1. Click 'Start.' Select 'Run.'
2. Type 'cmd.' Press 'Enter.'
3. Type 'cd C:/WindowsSystem32.' Hit your 'Enter' key and type 'cacls wgatray.exe/d everyone.' Hit the 'Y' key. Enter in 'cacls wgalogon.dll/d everyone' and hit the 'Y' key. Type in 'cacls legitcheckcontrol.dll/d everyone.' Hit the 'Y' key and reboot your computer.
Read more ►

Wednesday, February 1, 2012

How to Register Wininet.dll


1. Go to your Start menu and hit “Run.”
2. Write “cmd” in the box and click “OK.”
3. Write “regsvr32 C:\windows\system32\wininet.dll” and press “Enter” on your keyboard.
Read more ►

How to Fix Shlwapi.dll


1. Press 'Ctrl + Shift + Esc' to launch the Windows Task Manager.
2. Click 'File' and select 'New Task.'
3. Paste 'control appwiz.cpl' in the field. Press 'Enter.'
4. Scroll through the list of programs to locate 'Windows XP Hotfix -- KB834707.' Click the hotfix and click 'Remove.' Click 'Next' at the prompts to continue the removal process. Click 'Finish' to reboot your system.
5. Click 'Start' and open 'Control Panel.'
6. Open the 'Add/Remove Programs' option. Select 'Windows XP Service Pack 2.' Follow the instructions in Step 4 to remove the service pack.
7. Click 'Start' and select 'Programs.' Open 'Windows Update.'
8. Open the 'Important Updates' link. Reinstall Windows XP SP2. Click 'Next' at the prompts to finish the installation. Allow your system to reboot.
Read more ►

How to Restore a System Error


1. Download and install the free version of TweakNow RegCleaner (see Resources). Run the RegCleaner setup to finish the installation. Open the registry-cleaning tool and click 'Home.' Place a check by the 'Clean registry' and 'Clean traces of your computer' boxes. Click 'Fix and Clean' to restore the system errors on your PC. Reboot your system once the process is complete.
2. Download and install Microsoft Windows Malicious Software Removal Tool (see Resources). Run the setup to complete the installation. Scan your 'C' drive for system infections that might be causing the system errors. The tool automatically removes any infections. Reboot your system after the scan.
3. Download and install the trial version of How to Recover Hard Drive Data (see Resources). This tool recovers missing data. Run the setup and follow the on-screen instructions to complete the installation. Open the tool and select the restore data wizard to restore the system errors.
Read more ►